Australis 26k™ Scanning Receiver
Quick Overview
This scanning receiver is a lightweight and portable tracking instrument for VHF transmitters. It is the preferred choice worldwide for those people who need to find a VHF transmitter under all conditions.
Details
Features:
| Headset: | Two 3.5mm phone jacks, one disables the audio outputs loud speaker |
| Memory: | Retention memory is retained while receiver is switched off and while battery packs are changed |
| Indicator: | Low battery indicator (beep notification) |
| External Socket: | Data logging and remote control |
| Display: | A graphic type liquid crystal display approximately 18mm x 16mm Displays all frequency, signal strenght and mode date LED back lighting which can be switched on for night viewing |
| Volume Control: | Conventional knob operated potentiometre with on/off switch |
| Gain Control: | Knob operated potentiometre (gain reduction is 50dB) |
| Others: | Leather case |
Specifications:
| Frequency Ranges: |
148.000 - 151.999MHz 149.000 - 152.999MHz 160.000 - 163.999MHz 170.000 - 173.999 MHz |
| Frequency Selection: | 1kHz steps with fine tuning in 100Hz |
|
Frequency Memories: |
10 banks of 10 memories with fine tune offset stored for each frequency |
| Memory Scanning Rate: | Can be set to 1.25, 2.5, 5 or 10 seconds (default 1.25 sec/chn) |
| Audio Output: | 250mW into internal Loudspeaker or external load |
| Size: | 50mm (H) x 145mm (W) x 170mm (D) |
| Weight: | <1kg |
Downloads
![]() |
Australis (Size: 734.1 KB) |



